Module with Digital Inputs and Outputs

article number19300-1301
connectors4 screw type terminals
IP codeIP20
galvanic isolationoptocouplers
coolingnatural convection, fanless
enclosurePolyamide
weight140 g
dimensions114,5 x 22,5 x 99 mm
operating temperature range-40 °C … 70 °C / -40 °F … 158 °F
storage temperature range-40 °C … 85 °C / -40 °F … 185 °F
digital input voltage range-30 V … 30 V
digital input voltage levels0 = -30 … 5V, 1 = 15V … 30V
max. input frequency100Hz
max. output current500 mA
max. output frequency100Hz
max. output voltage30 V
approvalsUL, E465797 (only isNet DIO4)

article number19300-1401
connectors8 screw type terminals
IP codeIP20
galvanic isolationoptocouplers
coolingnatural convection, fanless
enclosurePolyamide
weight250 g
dimensions114,5 x 45 x 99 mm
operating temperature range-40 °C … 70 °C / -40 °F … 158 °F
storage temperature range-40 °C … 85 °C / -40 °F … 185 °F
digital input voltage range-30 V … 30 V
digital input voltage levels0 = -30 … 5V, 1 = 15V … 30V
max. input frequency100Hz
max. output current500 mA
max. output frequency100Hz
max. output voltage30 V
approvalsUL, E465797 (only isNet DIO4)

Contact

Request an offer
Support request

Downloads

isNet Line DTM - (12.8 MiB)
isNet-Line_manual - (13.9 MiB)

The isNet DIO module is an extension module for the product family isNet Line with digital inputs and outputs. The module is available with 4 channels or with 8 channels. Every channel consists of a 4 pin screw-type terminal with one input and one output per channel. It conforms to IEC 61131 and can read inputs, that represent the state of engines, valves and other equipment with binary signals. Also, it can switch pumps, valves, heaters, fans or other industrial equipment with its outputs. In combination with other fieldbus specific modules, the isNet DIO can extend every fieldbus with digital I/O capability.

Channel assignment

Back to our GATEWAYS