PROFIBUS DP Ethernet Gateway

article number19300-0401
connector(s)RS-485
transmission rate9,6 kbit/s – 12,0 Mbit/s
DP protocolsDP V0, DP V1
IP codeIP20
galvanic isolationoptocoupler
coolingnatural convection, fanless
power consumtion2,5 W
enclosurePolyamide
weight140 g
dimensions114,5 x 22,5 x 99 mm
operating temperature range0 … 50 °C / 32 °F … 122 °F
RoHs2-conformyes
driver softwareWindows XP, Vista, 7, 8, 10, 11
delivery contentPROFIBUS module, driver-, configuration- and testsoftware; documentation German and English on USB stick
available softwareisNet DP DTM 32 & 64 Bit, isPro MultiServer (OPC)

article number19300-0501
connector(s)RS-485
transmission rate9,6 kbit/s – 12,0 Mbit/s
DP protocolsDP V0, DP V1
IP codeIP20
galvanic isolationoptocoupler
coolingnatural convection, fanless
power consumtion2,5 W
enclosurePolyamide
weight250 g
dimensions114,5 x 45 x 99 mm
operating temperature range0 … 50 °C / 32 °F … 122 °F
RoHs2-conformyes
driver softwareWindows XP, Vista, 7, 8, 10
delivery contentPROFIBUS module, driver-, configuration- and testsoftware; documentation German and English on USB stick
available softwareisNet DP DTM 32 & 64 Bit, isPro MultiServer (OPC)

Contact

Request an offer
Support request

Downloads

isNet Line DTM - (12.8 MiB)
isNet-Line_manual - (13.9 MiB)

The isNet DP module extends the main module isNet Lite to work as a PROFIBUS DP Ethernet Gateway. The isNet DP modules are available as one and two channel version. The main module can be enhanced with a maximum of 5 PROFIBUS modules, so up to ten PROFIBUS segments can be accessed from the main module. The PROFIBUS channels are galvanically isolated, at the 2 channel version each channel is isolated separately.

The protocols DP/V0 and DP/V1 are supported. The modules are operated via the isPro CommDTM. The DTM is compliant to the FDT 1.2.1 specification and integrates the gateway into every FDT-frame application.

Channel assignment

Back to our GATEWAYS